It is recommended to clean and wash the housing in freshwater using a special agent that does not corrode the metal. If it is not possible to buy it in a specialized store, liquid soap will do. It is completely safe for the environment and the ship itself. So, today I will talk about Boat Maintenance. Let’s go!

When selecting a chemical solvent, remember the following:

• it must not corrode the hull of the vessel;
• It should be easy to rinse out;
• It should be environmentally safe.

Dirt and algae should be removed immediately after using the aluminum boat. To remove hard to remove dirt and various scratches, experts recommend using a grinder. Many people pay great attention to the best boat oxidation remover. It is always necessary during the operation of the ship. But this is not a prerequisite, as it does not harm the hull.

Storage Features

During transportation, a special tent should be used. Cover the vessel is required so that rainwater or other possible moisture does not accumulate inside. But the product must not be sealed hermetically: good ventilation must be provided. The owner must purchase two awnings:

• A summer one, which is used for transportation;
• A winter one, which provides reliable long-term storage.

It is important that the nose of the product is higher than the karma. It is recommended to leave the drainage system open. This will allow water to drain, minimizing the risk of rust. If signs of rust appear, it is an indication of improper maintenance. It is necessary to promptly use a grinder to get rid of them and treat the body with a special solution that will prevent the reappearance of rust.

Additional Information

Welded boats are particularly susceptible to corrosion. Even small dents can provoke deformation of the metal, so you need to pay special attention to them after use. Riveted models are less susceptible to destructive factors, then there it is necessary to pay attention to the connecting structures. Usually, dark, whitish or gray spots appear in these places.

The fewer connective structures, the better. This must be remembered when ordering a particular model. By contacting our company, you can buy the boat you are interested in at a bargain price. We have our own production, so we can offer favorable conditions of cooperation.

Metal Hulls

Welded hulls of yachts are mainly made of aluminum-magnesium alloys. They are highly resistant to corrosive manifestations. When visually inspecting them, you should pay attention to the presence of dents. They should be straightened by hitting them with a small sledgehammer from the inside of the housing through the padding of a board or bar. On the outside of the dent, some flat metal shoring should be applied to make the blow harder.

Riveted hulls are most commonly made of duralumin. This alloy is much more susceptible to corrosion in seawater than aluminum-magnesium. The first signs of beginning corrosion are small dark spots on the surface of the hull, forming sinks in the metal. Such spots should be scraped with a grinder until an even metallic color appears.

At the joints of parts made of different alloys or metals, due to the occurrence of galvanic currents, corrosion develops much faster. Special attention should be paid to such joints – a corroded bolt, rivet, or cotter pin can lead to great trouble in a storm. Riveted hulls should be checked regularly for tight seams. Problem areas of the hull are usually the front end, hitting the wave when moving, the engine mounting, or the propeller shaft outlet due to constant vibration. Weakened and loose rivets are replaced with new ones, and the connecting seams are checked for leaks. For this purpose, chalk is diluted with water and applied to the seams on the outside of the hull. After the chalk solution dries, the seams are smeared with kerosene from the inside. Dark spots appearing on the outside indicate a lack of tightness of the seam in this area.

Boat Care

For a sailboat, the sails are the most problematic part that needs constant attention. They should be checked after every crossing, especially when accompanied by storms. The most vulnerable part of the sails is the seams along their edges, the places where the cloth periodically comes into contact with rigging and spars, and the eyelets through which the running rigging is threaded.

Over time, the canvas sail tends to stretch. Which increases its sagging and fluffing. This leads to increased stress on the seams. With excessive stretching of the fabric, it is impossible to fix this defect and the sail should be replaced. Frayed places can be strengthened by applying additional patches. But it is unlikely that you will be able to sew the tears yourself. To do this, it is better to ask for help from a craftsman with the necessary material and experience. Daily sails can be wrapped around the stretch during anchorages. At the end of the regatta, “racing” sails should be removed and folded up until the next time. For long anchorage in the city, it is better to cover the furled sails outside to avoid industrial chemicals and dirt contained in the atmosphere getting on them. Synthetic sails are resistant to humidity, and if dirty, they can be washed in water with soap. But it is not recommended to use the widely advertised detergents with “harsh” effects for washing them.

Repair, Painting, Boat Maintenance – Boat Maintenance

Boat maintenance, yacht and boat repair, boat painting – problems that worry many boat owners. However, everything is in order. The first important question – painting a yacht or boat. This process should be approached very seriously for a number of reasons, and it is not only for aesthetic appearance, which, of course, should be perfect. The lacquer coating reduces the influence of the water environment since it is the moisture, strange as it may seem, that is the worst enemy of the boat surface.

Thus, by creating a protective layer, quality paint helps to protect yachts and other vessels from corrosion, osmosis, and underwater fouling. It gives a chance to improve the boat’s gliding that affects its speed qualities. A properly painted surface is better at cleaning up plaque, algae, and other contaminants. So, I hope this article was helpful for you and now you are aware of boat caring.